MSW Motor Technics MSW-SAW 16 SCROLL Manual De Instrucciones página 27

Setting the Saw Bench
• Release the star button and bring the saw bench to a right angle in relation to the saw blade. Use a 90°
angle L-square measure the right angle between the blade and the bench. The saw blade be at 90° to the
angle.
• Close the star button when the distance between the blade and the 90° angle is at a minimum. The
bench should then be at 90° to the saw blade.
Setting the angle scale
• Release the lock screw and bring the indicator to the zero position. Fasten the screw. Please note: the
angle scale is a useful piece of supplementary equipment, but should not be used for precision work. Use
scrap wood for saw tests, adjust the bench if necessary.
EN
1 – Saw Bench
2 – Angle scale
3 – Star Knob
4 – Lock Screw