Wilo Yonos MAXO Instrucciones De Instalación Y Funcionamiento página 21

1 General information
1.1 About these instructions
These installation and operating instructions are an integral part of the device. Read these instructions be-
fore commencing any work and keep them in an accessible place at all times. Strict adherence to these in-
structions is a requirement for the intended use and correct operation of the product.
All specifications and markings on the device must be observed. These installation and operating instructions
correspond to the relevant version of the device and the underlying safety standards valid at the time of go-
ing to print.
The language of the original operating instructions is German. All other languages of these instructions are
translations of the original operating instructions.
2 Safety
2.1 Safety information
This section contains basic information which must be adhered to
during installation, operation and maintenance. Failure to follow the
installation and operating instructions will result in injuries to per-
sons, damage to the environment and the device and result in the
loss of any claims for damages. Failure to follow the instructions will,
for example, result in the following risks:
• Injury to persons from electrical, mechanical and bacteriological
factors as well as electromagnetic fields
• Environmental damage from leakage of hazardous substances
• Damage to property
• Failure of important product functions
• Failure of required maintenance and repair procedures
The directions and safety instructions in the other sections must
also be observed!
2.2 Identification of safety instructions
These installation and operating instructions set out safety instruc-
tions for preventing personal injury and damage to property, which
are displayed in different ways:
• Safety instructions relating to personal injury start with a signal
word and are preceded by a corresponding symbol.
Installation and operating instructions • Wilo-Connect Modul Yonos MAXO • Ed.03/2024-02
en
21