Candy RO4 476DWMC7/1-S Manual De Instrucciones página 67

WARNING:
Don't touch the buttons while inserting
the plug because
calibrates the systems during the first
seconds: touching the buttons, the
machine couldn't work property. In
this case, remove the plug and repeat
the operation.
SMART RING (ring for selecting
programmes)
When the SMART RING is turned, the

appliance will be turned on and the
display will show the description and
parameters of the selected programme.
At the end of the cycle, remember to switch

off the appliance by turning the SMART
RING to the OFF position, then unplug the
appliance and turn off the water supply.
First starting
- Language setting
After connecting the machine to the network

and turning it on, press the "TEMPERATURE
SELECTION" or "SPIN SELECTION" button
to display the available languages.
Select the desired language pressing the

START/PAUSE button.
- Change the language
If you want to change the setting language

you will have to press simultaneously
"DELAY START" and "EASY IRON"
buttons for about 5 seconds. The word
ENGLISH will appear on the display and
it will be possible to choose a new language
(by pressing "TEMPERATURE SELECTION"
or "SPIN SELECTION" button).
Press START/PAUSE button to confirm

your choice.
START/PAUSE button
Close the porthole BEFORE pressing
the START/PAUSE button.
the machines
67
To start the selected cycle with the preset

parameters, press START/PAUSE. When
the programme is running, the display will
show the time to elapse.
Moreover, if you want to modify the

chosen program,
options buttons,
parameters and then press START/
PAUSE button to start the cycle.
Only the options compatible with the
set programme can be selected.
After switching on the appliance, wait a

few seconds for the programme to start
running.
PROGRAMME DURATION
When a programme is selected the

display automatically shows the cycle
duration, which can vary, depending on
the options selected.
Once the programme has started you will

be kept informed constantly of the time
remaining to the end of the wash.
The appliance calculates the time to the

end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.
PROGRAMME END
"END" will appear in the display at the

end of the program and the DOOR
LOCKED light will go off, it is now
possible to open the door.
At the end of the cycle, turn off the

washing machine by turning the SMART
RING to the OFF position.
The SMART RING must ALWAYS be
put in the OFF position at the end of
the washing cycle before you can
select a new washing cycle.
press the desired
modify the default