Descargar Imprimir esta página

Master STP 135-S exact Instrucciones Para El Manejo página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
0702645X - GB Seite 17 Samstag, 15. Mai 2004 8:34 08
The guide roller 13 should occasionally be checked
for wear and lubricated with a drop of oil. If it is
worn, it must be replaced.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorized customer service agent
for Würth power tools.
For all correspondence and spare parts orders,
always include the article number on the type plate
of the machine.
For the current spare parts list of this machine, log
into the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest
Würth branch office.
Guarantee
For this Würth machine, we provide a guarantee in
accordance with statutory /country-specific regula-
tions from the date of purchase (proof of purchase
by invoice or delivery note). Damage that has
occurred will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the device is sent
undisassembled to a Würth branch office, your
Würth sales representative or a customer service
agent for Würth power tools.
Environmental Protection
Recycle raw materials instead of
disposing as waste.
The machine, accessories and
packaging should be sorted for
environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for categorized
recycling.
Noise/Vibration Information
Measured
EN 60 745.
Typically the A-weighted sound pressure level of the
machine is 84 dB (A). Measurement uncertainty
K=3 dB.
When working, the noise level can exceed
85 dB (A).
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents: EN 60 745 accord-
ing to the provisions of the directives 89/336/EEC,
98/37/EC.
04
Adolf Würth GmbH & Co. KG
M. Wölfle
Subject to change without notice
values
determined
according
R. Bauer
to
2
.
17

Publicidad

loading

Este manual también es adecuado para:

Stp 135-b exact