Bosch Professional GWS 27-180 PR Manual Original página 20

20 | English
The power tool must not be used to grind stone materials
with diamond grinding heads, or to work on composite ma-
terials.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spindle lock button
(2) Vibration damping
(3) On/off switch
(4) Standard auxiliary handle (insulated gripping sur-
a)
face)
(5) Two-pin spanner for clamping nut
(6) Protective guard for grinding
(7) Coding cam
(8) Clamping lever for protective guard
(9) Adjusting screw for protective guard
(10) Mounting flange with O‑ring
a)
(11) Grinding disc
(12) Disc brush (dia. 22.22 mm)
a)
(13) Disc brush (M14)
Technical Data
Angle grinder
Article number
Rated power input
A)
Rated speed
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding
spindle
Soft start
Restart protection
Kickback control
Rotatable auxiliary handle
Weight according to EPTA-Proced-
ure 01:2014
Protection class
A) Rated speed for the selection of appropriate application tools in accordance with EN 60745-2-3. The actual rated speed must not exceed
the rated speed and is therefore lower.
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending upon the product and are subject to application and environmental conditions. For further information
www.bosch-professional.com/wac.
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise level of the power tool are:
90 dB(A); sound power level 101 dB(A). Uncertainty K =
3 dB.
1 609 92A 91W | (13.11.2023)
(14) Clamping nut
(15) Quick-clamping nut
(16) Protective guard for cutting
(17) Cutting disc
(18) Handle (insulated gripping surface)
(19) Grinding spindle
(20) Diamond cutting disc
(21) Extraction guard for cutting with cutting guides
(22) Hand guard
(23) Rubber sanding pad
(24) Sanding sheet
(25) Round nut
(26) Cup brush
(27) Open-ended spanner
(28) Conical brush
(29) Diamond annular cutter
(30) Vibration-damping auxiliary handle (insulated grip-
a)
a) Accessories shown or described are not included with the
GWS 27-180 PR GWS 27-230 PR GWS 27-180 JR GWS 27-230 JR
3 601 HC6 1..
W 2700
–1
min 8500
mm 180
M 14
mm 25
●
●
●
●
kg 6.1
/ II
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-3:
Surface grinding (roughing):
a
h
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
ping surface)
product as standard. You can find the complete selection of
accessories in our accessories range.
3 601 HC7 1.. 3 601 HC6 3..
2700
6500
230
M 14
25
●
●
●
●
6.3
/ II
(triax vector sum) and uncertainty K
h
2 2
= 6.5 m/s , K = 1.5 m/s ,
a)
a)
3 601 HC7 3..
2700 2700
8500 6500
180 230
M 14 M 14
25 25
● ●
● ●
● ●
● ●
6.1 6.3
/ II / II
Bosch Power Tools