Publicidad
Idiomas disponibles
Idiomas disponibles
To remove the visible tank, pull it in user direction. Empty and clean the water tank and assembly
it back as shown on the picture.
To remove the inner tank, once removed the lower tank according to the figure, pull it down using
the two central ribs. Empty and clean the tank and assembly it back as shown on the picture.
Drain pipe connection
The U-Flow hand dryer is ready to be connected to the drain pipe. Remove the cover and
connect the internal drain pipe tank side to the arrow marked hole at the back part of the hand
dryer. Assembly the cover.
Assemlby the supplied hose to the hand dryer back. Assembly the the hand dryer to the wall,
placind the assembled hose inside the wall drain pipe.
-12-
HandDryerSupply.com | 804-859-2498 | sales@handdryersupply.com
Publicidad
