Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT: Before using the 3D feature of your TV, read the
Cautions for 3D section in the back of the manual.
Operating the 3D Mode "
Press the
3D
button on the remote control. Use Up
or Down buttons to select 3D Features and press
OK to view.
Using the 3D Eyewear
Refer to the manual of the 3D eyewear before use for detailed
information and instructions on usage.
You can enjoy viewing 3D images now by wearing
the 3D eyewear. Turn off the eyewear after using it.
The 3D eyewear may not operate correctly at the
outside of the viewing range. Use the 3D eyewear
within the viewing range. The range may be shortened
depending on the obstacles between the TV and the
3D eyewear, or the surrounding environment.
Cleaning and maintenance of the 3D eyewear
• Do not apply spray cleaners directly onto the surface
of the 3D eyewear.
• Do not drop or bend the 3D eyewear.
LITHIUM BATTERY CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace with the same or equivalent type.
Viewing 3D images
Incoming video signals can either be in 2D or 3D
format. A 2D signal can be viewed in either 2D or 3D,
and 3D can be viewed in either 2D or 3D. If the 3D
Mode option in the 3D Settings menu is set to Auto,
the TV can detect the 3D signal and change to 3D
mode automatically. Otherwise you can change the
viewing mode from the 3D Settings menu. Press the
3D button on the remote for quick access to the 3D
Settings menu.
The format of the 3D signal can be either Side By Side
(SBS) or Top Bottom (TB). You may have to choose
the correct format using the 3D Settings menu if the
TV can not detect it automatically.
Moreover, when viewing in 2D, you can change 2D
images to 3D images by enabling the Virtual 3D
option in the 3D Settings menu.
3D format
Side By Side
Images for the left and right eyes are positioned
(SBS)
side-by-side.
Images for the left and right eyes are positioned
Top Bottom (TB)
at the top and bottom of the screen.
Using 3D Feature
3D
"
Description
English - 16 -
Watching 3D images in 2D format
First off all the TV should be in 3D mode. This means
the 3D Mode shouldn't be set to Off. Press the 3D
button on the remote to open 3D Settings menu
quickly. Select 2D Only option using the Up or Down
buttons. Press Left or Right buttons to set 2D mode
as Left, Right or Off.
Watching 2D images in 3D format
Press the 3D button on the remote to open 3D
Settings menu quickly. Select Virtual 3D option using
the Up or Down buttons. Press Left or Right buttons
to set as On or Off.
Switching left and right images
The left and right eye shutter timing of the glasses
can be swapped. If 3D images look blurred, switch
the left and right sides of the 3D image.
Press the 3D button on the remote to open 3D
Settings menu quickly. Select Left/Right Swap option
using the Up or Down buttons. Press Left or Right
buttons to set as Left/Right or Right/Left.
Publicidad
