Publicidad
Idiomas disponibles
Idiomas disponibles
English
1.
Read these instructions.
2.
Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7.
Do
not
block
any
openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
9. Only use attachments/accessories
specified by the manufacturer.
10. WARNING: To reduce the risk of
fire or electric shock, do not expose
this device to water, rain or moisture. In
addition, the device must not be exposed
to dripping or splashing liquid and no
objects filled with liquids, such as vases,
should be placed on the device.
11. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
12. Do
not
attempt
to
device yourself. Opening the device
may be dangerous. Contact a qualified
professional for all work on the device.
13. Do not place naked flame sources,
such as lit candles, near the device.
14. When
replacement
are needed, use only the components
specified
by
the
manufacturer
components
with
identical
features to those of the original product.
Using non-compliant components could
cause fires, electric shocks or other risks.
15. After any maintenance or repair work
on the device, test it to check that it is
working safely.
16. Turn the source to minimum before
connecting the products and turning up
the volume. Once the products are in
place, gradually increase the volume to a
reasonable and comfortable level.
Warning symbol. This symbol is designed to warn the user of the presence of
important instructions mentioned in the user manual and relating to the handling,
operation and maintenance of the device.
17. To avoid damaging your hearing,
do not listen to loudspeakers at high
volumes
Listening to loudspeakers at an excessive
volume can cause damage to the user's
ears and may lead to hearing problems
ventilation
(temporary
buzzing in the ears, tinnitus, hyperacusis).
Exposing your ears to a volume higher
than 85dB SPL-LAeq for several hours
can irreversibly damage your hearing.
18. Never use the headphones without
the earpads or protective tips.
19. Be sure to use the headphones in
such a way that you can still hear sounds
around you. In particular, the product's
active noise cancellation may make
ambient noise inaudible or significantly
change your perception of warning
signals; reducing the chance of hearing
ambient noise is a risk for yourself
and those around you. Do not use the
headphones
special attention, such as when outdoors
repair
this
in heavy traffic, near a construction site
or a railway line, etc. Never drive a vehicle
(car, motorcycle, boat, electric scooter,
etc.) or ride a bicycle, skateboard, roller
blades, hoverboard, etc. while wearing
the headphones. Any use under these
components
circumstances is dangerous and, in some
or
countries, illegal.
20. It is also not recommended to use the
technical
headphones for running, walking or doing
any other activity in crowded places.
When using the headphones under these
circumstances, set the volume to low
so that you can hear ambient sounds,
including horns, alarms and warning
signals. In any case, the headphones were
not designed to be used when practising
sports.
21. Do not use the headphones for
anything but their original function. Never
use the headphones as a form of noise
protection. Do not use the headphones
as an aviation communications headset.
IMPORTANT SAFETY INSTRUCTIONS!
for
long
periods
of
or
permanent
deafness,
in
conditions
requiring
22. Use compliant adapters to connect
your headphones to aeroplane seat
time.
plugs. Failure to do so may result in
personal injury or property damage
caused by overheating.
23. If you feel heat or lose audio signal,
remove and disconnect the headphones
immediately.
24. Do not apply any weight or pressure
to the headphones, including when
turned off or not in use.
25. Do not expose your headphones to
moisture or immerse them in water.
26. The headphones do not require
specific cleaning. If necessary, use a soft,
dry cloth. Do not use cleaning products
containing solvents.
27. Do not modify the system or its
accessories. Unauthorised modifications
may compromise your safety, regulatory
compliance and device performance.
If you replace your earpads, be sure to
replace them only with the specific pad
model provided by the manufacturer so
as not to alter the comfort or the sound
quality.
28. This
product
components and generates magnetic
fields
which
may
pacemakers and implanted defibrillators.
Before using the headphones, contact
your GP if you have any questions
regarding the effect of these components
on the functioning of an implanted
medical device.
29. After removing the product from its
packaging, keep the packaging out of
the reach of children. It could present a
suffocation risk.
30. Some
users
sufficient enough to use the product on
their own without danger. In particular,
children under 14 or people with some
types of disabilities must be supervised
and/or accompanied when using the
device.
31. The
product
(speaker driver suspensions) containing
a small amount of : 6,6'-di-tert-butyl-
2,2'-methylenedi-pcresol
Ingestion of this substance may harm
your fertility. The substance may be
harmful to aquatic organisms in the long
term; any spillage into the environment
or sewage system must be avoided.
Recycle the product and its parts; use the
appropriate collection systems or contact
the dealer from whom the product was
purchased to recycle the product and its
components safely.
contains
magnetic
interfere
with
who
are
not
self-
incorporates
parts
(DBMC).
Publicidad
