10. DO NOT use if it has been damaged, left outdoors or
dropped in water.
11. DO NOT use where hazardous dust is present.
12. DO NOT use in an explosive atmosphere.
13. DO NOT pick up or use near flammable or combustible
fluids, hazardous dusts or vapours.
14. CAUTION - If it is suspected that there is hazardous dust
or flammable/corrosive material, stop cleaning the area
immediately and consult your superior.
15. DO NOT use to clean up any burning or lighted materials
such as cigarettes, matches, ashes or other combustible
objects.
16. Only use the machine on firm level surfaces. DO NOT
use on a gradient or slope of more than 2%.
17. DO NOT use on rough uneven surfaces e.g. industrial or
coarse concrete surfaces.
18. DO NOT use outdoors e.g. on patios, decks or rough
surfaces.
19. CAUTION - This machine is for dry indoor use only and
should not be used or stored outdoors in wet conditions.
20. Take care when using a machine near the top of stairs to
avoid overbalancing.
21. DO NOT cover the machine when in use.
22. DO NOT run the machine dry, as this could damage the
floor surface or the machine itself.
23. DO NOT leave machine running unattended.
24. Keep hair, loose clothing, hands, feet and all other parts of
the body away from openings and moving parts.
25. DO NOT put any object into openings. DO NOT use
with any opening blocked; keep free of dust, debris and
anything that may reduce airflow.
26. DO NOT use volatile or combustible solvents (e.g.
diesel/petrol/IPA/trichloromethane) nor any corrosive,
toxic or highly irritant substances to wash floors, even if
diluted. In the event of accidental contact with any such
substances(e.g. due to spills) follow the decontamination
procedures in force at the user site.If in any doubt about
the condition of the machine, contact Truvox or the
dealer/agent who supplied the machine.
27. DO NOT operate the machine if it malfunctions or is
damaged in any way. Contact an authorised service agent
for repair or adjustments.
28. WARNING DO NOT fill the machine with water hotter
than 40ºC.
USE ON ESCALATORS
29. Ensure the machine is positioned at the bottom of the
escalator with the escalator moving towards the operator.
CAUTION - Risk of electric shock
30. DO NOT operate the machine with a damaged charger
power cord or plug, or after the machine malfunctions or is
damaged in any way. Contact an authorised Service Agent
for repair or adjustment.
31. The machine must be kept clean and in good condition with
regular inspections of the charger power cord and plug for
signs of any damage. If any parts are damaged they shall only
be replaced by an approved part by the manufacturer, its
service agent or a similar qualified person in order to avoid
a hazard.
3
32. Only replace the charger power cord with the type
specified in the instruction manual.
33. When unplugging, pull the plug, not the charger power
cord.
34. WARNING: Keep the charger power cord clear of
moving parts.
35. DO NOT kink or twist the charger power cord and keep
cord away from heated surfaces.
36. DO NOT operate switches or touch the mains plug with
wet hands as this may cause electric shock.
37. DO NOT pull or carry by the charger power cord. DO
NOT use cord as a handle, close door on cord or pull
cord around sharp edges or corners.
38. Unless charging, the plug of the charger power cord must
be removed from the socket-outlet when not in use and
before commencing cleaning of the machine or undertaking
maintenance operations.
FOR UK MARKET
Charger
Plug: Molded plug, UK standard, 3 pin, 250V, 13A rated with BS
approval and in-built BS approved fuse.
Cable: 3 x 0.75 SQ mm PVC insulated Cable, type H03VV-F with
VDE/KEMA-KEUR approval.
Connector: Molded connector, 250V,2.5A rated, IEC C5
Connector with BS approval.
SAFE DISPOSAL OF BATTERIES
• The batteries must be neutralised through an approved
secondary treatment facility prior to disposal as waste.
• The battery can be recycled at an authorised facility, through
a licensed waste carrier.
CLEANING AGENTS
1. When using cleaning and care agents, the manufacturer's
danger warnings must be followed and protective goggles and
clothing must be worn.
2. Only use low-foaming, non-combustible cleaning agents which
DO NOT contain generally health-hazardous substances.
3. Please ensure that after each use any chemical residue is
rinsed out with clean water.
BRUSH IDENTIFICATION
Red, Blue, White and Yellow brush buttons are packed with the
machine. Simply plug the buttons into the hole in the brush as
shown. Clear identification, by colour coding, helps prevent
cross contamination.
TRANSPORTING THE MACHINE
• Take extreme care when moving the machine up or down
steps or stairs.
• Incorrect lifting techniques may result in personal injury. We
advise that the manual handling regulations are followed.
• Carefully wrap the charger power cord and store in dry
indoor location.
• DO NOT expose the machine to rain or moisture.
• When transporting the machine ensure that all components,
tanks and removable parts are securely fastened, and that the
power cord and plug are not trailing.
02-23