Panasonic AW-PH360L Manual De Instrucciones página 38

Connections
Head connector panel
The camera and lens control cables are connected to this panel.
ND/EXT connector
This is for controlling the ND filter and
lens extender of the power lens unit.
Connect it when using a power lens
unit equipped with an ND filter and lens
extender function.
ND signal
ND return
EXT signal
(As viewed from cable end)
LENS I/F connector
This is for controlling the zoom/focus
functions of the power lens unit.
Connect the remote (zoom/focus)
control cable of the power lens unit
here.
CVCC
CGND
EXT return
- 37 (E) -
SDI IN connector
This is for SDI signal input.
Connect this to the HD SDI OUT
connector on the AK-HC1500 or
AK-HC1800 or to the SDI OUT connector
on the SDI card (AW-HHD870 or
AW-PB504) installed in the camera.
Use a coaxial cable (BNC) for the
connecting cable.
Cable used when HD-SDI signals are input:
5C-FB, 70 to 80 cm
Cable used when SD-SDI signals are input:
5C-2V, 70 to 80 cm
CAMERA I/F connector
This is for camera control.
Connect this to the I/F REMOTE
connector on the camera with the
supplied camera cable.
When controlling the AK-HC1500 or
AK-HC1800, use the optional
pan-tilt cable (AW-CA15H29) or cable
kit (AW-CAK4H1).