VisioFocus 06400 Manual De Instrucciones página 20

at various times of the day. To help you with this, fill out the table "FAMILY MEMBER
TEMPERATURES at different times of day and when in good health conditions" and
keep it as a reference: https://www.tecnimed.it/download/Tables.pdf
4.1 Taking the body temperature: FOREHEAD
• At the first use, insert 4 AAA batteries as
explained at #9.
• Open the protective cap by rotating it 90° (fig.
2).
• Approach VisioFocus to the forehead.
• Press the "face"
The two aiming lights turn on and you will begin
to see the temperature reading, projected onto
the forehead between two arches. The display
starts to show the temperature, together with the
symbol .
• While keeping the VisioFocus perpendicular to
the center of the forehead, move it in or back
away from the forehead until the temperature
reading is set squarely between the two arches
(fig. 3):
If the thermometer is too far away, or too close,
the temperature will not fall between the two
arches (fig. 4 and 5).
• When you see the temperature at the
midpoint between the two arches (fig. 6),
the thermometer is at the right distance: release
the button and keep the device steady while the
lights flash.
You can also read the temperature on the
display, lit in light blue. If necessary, you can
immediately take another reading.
• Close the protective cap.
When the thermometer remains idle for 20
seconds, it reverts to stand-by mode and
will display the room temperature for 4 hours
before shutting off. If you want it to shut down
immediately after the 20 second interval, read the
chapter on "Energy Saving" mode (par. #7).
4. HOW TO USE
button and hold it down.
- 16 -
Fig. 2
Fig. 3
correct distance
and thermometer
perpendicular
to the forehead
Fig. 4
Fig. 5
Fig. 6
NO:
too
far
NO:
too
close
OK:
correct
distance