Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting (cont.)
Symptoms
Probable Causes
11. Water from
A. Normal operation.
steam head.
B. Water supply lines
C. Internal steam
12. No steam after
A. An error has
5 minutes of
activating the
steam.
B. The temperature
1235393-2-E
Recommended Action
A1. A small amount of
water discharged
from the steam head
just before, during,
and just after steam
use is normal.
A2. Water discharge from
the steam head
during the Power
Clean cycle is
normal.
B. Review the steam
are connected
generator installation
incorrectly.
guide and reinstall
the lines at the
proper locations.
C1. Turn off water
generator
supply to the steam
components are
generator. If possible,
not functioning
drain the tank.
properly.
Slowly open the
water supply valve
to refill the steam
generator.
C2. Call the Customer
Care Center using
the information
provided on the back
page of this manual.
A. Check the user
occurred.
interface for error
messages. If an error
message appears, see
the appropriate error
message
troubleshooting.
B. Confirm that the
setpoint has
temperature setpoint
already been
is greater than the
reached.
current steam room
temperature. Increase
the temperature
setpoint if desired.
22
Kohler Co.
Publicidad
