Agri-Fab 45-0613 Manual Del Usuario página 7

ASSEMBLE THE BLADE MOUNT ASSEMBLY
STEP 3:
(SEE FIGURE 3)
• Attach the brace tubes (6) to both sides of the blade
mount assembly (5) using two hex bolts (G) and two
hex nuts (L). Tighten hardware.
G
L
CONNECT THE BLADE MOUNT ASSEMBLY
TO THE HITCH MOUNT ASSEMBLY
STEP 4:
(SEE FIGURE 4)
• Slide the tube of the blade mount assembly (5) into the
tube of the hitch mount assembly (1) and secure using
a hex bolt (H) and a hex nut (L). Tighten hardware.
Note: Ensure that the hex bolt (H) travels through both of
the brace tubes (6).
6
5
G
FIGURE 3
L
6
5
ATTACH THE PIVOT SUPPORT BRACKET
ASSEMBLY
STEP 5:
(SEE FIGURE 5)
• Attach the pivot support bracket assembly (8) and
the plate brace (7) to the blade mount assembly (5)
using four hex bolts (F) and four hex nuts (L). Tighten
hardware.
8
F
7
1
H
5
FIGURE 4
1
L
7
FIGURE 5