Cisal WAVE WA00751 Información Técnica página 13

MAINTENANCE
CERAMIC DISCS HEADVALVE REPLACEMENT
- Close the supplies of cold and hot water.
- Unscrew the dowel (1) and remove the handle (2), the hole-cover plate (3) and the plastic ring
(4).
- Remove the plate (5) and unscrew the dowel (6) to remove the headvalve cover cap (7).
- Loosen the screw (8) and remove the extension (9).
- Unscrew the ceramic discs headvalve ( 10) and replace it. (Remove the broached reduction
(11) from headvalve rod and assemble it on the new headvalve).
- Reassemble proceeding in the opposite direction.
13