Punkt MC02 5G Manual Del Usuario página 5

Getting Started.
Please read the Product and Safety in formation before
using the MC02. Please also check punkt.ch for any updates.
Inserting the SIM card
and memory card.
You can insert two nano SIM cards
or one nano SIM card and one
microSD memory card into the
MC02.
1. Remove the SIM tray from the side
of the phone by inserting the SIM
ejector tool into the small release
hole next to it and pushing firmly.
2. Taking care not to touch the metal
contact element, place the nano SIM
card(s)/memory card in the card
slots. The angled corner ensures
correct orientation.
3. Insert the SIM tray back into
the MC02 with the SIM card(s) /
memory card contact area facing
downwards.
4
MC02_QSG_20240110_V8.indd 4-5 MC02_QSG_20240110_V8.indd 4-5
Charging the battery.
The battery may already be partially charged, before using
the MC02 you should charge it to 100% (max. 2.5 hours).
Plug the USB charger into an appropriate
power source and then connect it to the
phone with the USB-C cable provided.
When the display shows that the MC02 is
fully charged, unplug the charger from the
phone first, then from the power outlet.
To prevent cable or socket damage, always
pull the plug, never the cable, and pull in line
with the socket.
The MC02 can also be inductively charged using a wireless
charger.
If you are not using the MC02 for a few days, switch if off.
Switching the MC02 On/Off.
Long-press the Power button to switch on; short-press to
activate screen.
To switch off, long-press the Power button;
then tap the Power off icon on the screen.
5
13/01/24 15:11 13/01/24 15:11