Punkt MC02 5G Manual Del Usuario página 6

Setting up the MC02.
Long-press the Power button to turn on the MC02 and
follow the instructions on the screen.
If possible, update the operating system using WLAN to
avoid unnecessary mobile network data use.
Making a call.
1. Short-press the Power button to activate the screen and
swipe up to unlock the screen.
2. From the Home screen swipe left, then tap
the Phone icon followed by the Keypad icon.
3. Enter a phone number and tap the Call icon.
If you make a mistake, tap the Back icon.
4. When finished, press the End icon.
For full information about how to use the MC02, please download the Instruc-
tion Manual from punkt.ch
6
MC02_QSG_20240110_V8.indd 6-7 MC02_QSG_20240110_V8.indd 6-7
Product and Safety
Information.
Consult the Instruction Manual before using your MC02
(available at punkt.ch), read carefully and refer to the
product and safety sections for more details about the
information given here. Failure to comply presents a risk
of injury and damage to the device.
— The MC02 emits radio signals, which may interfere with
other electronic devices. Also, interference from other
electronic devices may affect its ability to connect with a
mobile phone network.
— Turn the MC2 off in areas where the use of mobile phones
is not allowed, or when it may cause radio interference
or danger.
— Obey all local laws covering the use of mobile phones
(including hands-free) when driving.
— Protect the MC02 from all forms of moisture at all times.
To prevent possible damage, do not use or store it in wet
conditions or high levels of humidity.
— Do not open, dismantle or modify the MC02. Never use it
if it is damaged. If servicing or repair is necessary, ensure
that this is only carried out by a qualified person.
— If the MC02 is damaged, stop using it and place it in a
plastic bag to contain possible battery leakage. The
MC02's screen is made of glass; protect it from impact. If
it breaks, do not touch or attempt to remove the broken
glass. Stop using the MC02 and arrange for the screen to
be replaced by an authorised technician.
7
13/01/24 15:11 13/01/24 15:11