Scheppach GS60 Traduccion Del Manual De Instrucciones Originales página 23

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we hope your new tool brings you much enjoyment and
success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regulations
and VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the de-
vice. The operating instructions are intended to help
the user to become familiar with the machine and take
advantage of its application possibilities in accordance
with the recommendations. The operating instructions
contain important information on how to operate the
machine safely, professionally and economically, how
to avoid danger, costly repairs, reduce downtimes
and how to increase reliability and service life of the
machine.In addition to the safety regulations in the
operating instructions, you have to meet the applica-
ble regulations that apply for the operation of the ma-
chine in your country. Keep the operating instructions
package with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture. Read
the instruction manual each time before operating the
machine and carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the ma-
chine and who are informed about the associated dan-
gers. The minimum age requirement must be complied
with.
In addition to the safety notices contained in this op-
erating manual and the particular instructions for your
country, the generally recognised technical regulations
for the operation of identical devices must be complied
with. We accept no liability for damage or accidents
which arise due to non-observance of these instruc-
tions and the safety information.
2. Device description (Fig. A)
1. Loading slot
2. On switch
3. Off switch
4. Machine body
5. Adjusting screw
6. Support feet
7. Wheel
8. Collecting box
9. Locking mechanism
10. Mains power connection
11. Switch for roll rotation direction
12. Reset switch
13. Axle shaft
14. Lock nut
15. Wheel sleeve
16. Washer
17. Wheel cap
18. Groove
a. Wrench
b. Allen wrench
c. Stopper
3. Scope of delivery
• Stopper
• Machine body
• Axle shaft
• Collecting box with Locking mechanism
• Wheel (2 pieces)
• Lock nut (2 pieces)
• Wheel sleeve (2 pieces)
• Washer (2 pieces)
• Wheel cap (2 pieces)
• Wrench
• Allen wrench
• Instruction Manual
Accessories:
• garden shears
• gloves
www.scheppach.com GB | 23