Scheppach GS60 Traduccion Del Manual De Instrucciones Originales página 26

• Only use extension cables that have been approved
for outdoor use and are resistant to splash water.
The core diameter for extension cables measuring
up to 25 m must be at least 2.5 mm², and 2.5 mm² for
cables longer than 25m. Always roll the whole cable
off the reel before use. Check the cable for damage.
• Do not unplug the shredder by the cable. Keep the
cable away from heat, oil and sharp edges
m WARNING! This electric tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain con-
ditions. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical im-
plants consult with their physician and the manufactur-
er of the medical implant prior to operating the electric
tool.
Residual risks
The machine has been built according to the state of
the art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• The use of incorrect or damaged mains cables can
lead to injuries caused by electricity.
• Release the handle button and switch off the ma-
chine prior to any operations.
• Even if you use this electric power tool in accord-
ance to instructions, certain residual risks cannot be
eliminated.
• Remaining hazards can be minimized by following
the instructions in „Safety instructions", „Intended
Use" and in the entire operating manual.
• Avoid accidental starts: do not press the start button
while inserting the plug into the socket.
• Use the tool that is recommended in this manual.
In doing so, your machine provides optimal perfor-
mance.
• Hands may never enter the processing zone when
the machine is in operation.
6. Technical data
Dimensions L x W x H
Blade cylinder Ø
Number of blades
Collection box capacity
Transport wheels Ø
26 | GB
650 x 455 x 910 mm
90 mm
8
60 l
175 mm
www.scheppach.com
Weight (kg)
Branch thickness max Ø
Motor
Nominal consumption P1
Blade cylinder revolutions
Operating type
Subject to technical changes!
Noise levels
Guaranteed sound power level L
Measured sound power level L
Measurement uncertainty K
Sound pressure level L
pA
Measurement uncertainty K
Note: The specified sound levels have been deter-
mined using a standardised test procedure and can be
used to compare different electronic devices. Further-
more, these values can be used to assess in advance
the strain on the user caused by the sound.
7. Before starting the equipment
m IMPORTANT!
You must fully assemble the appliance before us-
ing it for the first time!
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage
• Check the device and accessory parts for transport
damage.
• When complaints the dealer must be informed im-
mediately. Subsequent complaints will not be ac-
cepted
• If possible, store the packaging until the warranty
period has expired
• Read the operating instructions to make yourself fa-
miliar with the device prior to using it.
• Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available
from your specialized dealer.
20.5 kg
44 mm
230 - 240 V~ 50 Hz
2800 W
60 rpm
P40
94 dB
WA
91.7 dB
WA
2.67 dB
79.1 dB
3 dB
pA