Harman AKG HSC 271 Modo De Empleo página 27

4 Operating Notes
Windscreens
W 44 (HSC 171/271),
W HSD (HSD 171/271)
Replacing Ear Pads
Unplugging the Connecting
Cable
NOTE
HSC 171 HSC 271 HSD 171 HSD 271
If you use the headset in the open or need to place the microphone extremely
close to your mouth, we recommend using the supplied foam windscreen.
1) Slide the windscreen onto the microphone capsule.
2) Pull the windscreen over the outer edge of the microphone capsule.
1) Pull the ear pads off the
earphones.
2) To attach the new ear
pad(s), pull the elastic hem
of each ear pad over the rim
of the earphone base plate
all around.
1) Grasp the
depressing the
button.
2) Pull the connecting cable off
the headset.
When you connect the cable again, the connector will lock automatically.
connector,
locating
Operating Notes
27