Publicidad
Idiomas disponibles
Idiomas disponibles
B
A
C
D
E
F
OIL
OPERATING INSTRUCTIONS
Before starting trimmer remove blade guard (some models may not have a blade
guard). Plug cord into electrical outlet, operate at 120 volt, 60 cycle AC electrical
current or as noted on the unit. To start trimmer, move ON/OFF switch button to ON
position, to stop, move switch button back to original position. After using your Andis
trimmer, rewrap cord and store in a safe place.
For the purposes of recharging the battery, only use the detachable supply unit type
BTF3 provided with this appliance.
CHARGING TRIMMER
This battery charger is intended for use with Andis model BTF3 lithium-ion battery
with a rated capacity of 3.7V
2.8 Wh. Remove the trimmer and AC adapter from
the carton. Plug the adapter into a 120V AC outlet, or according to your local power
standards. Confirm the voltage available at each overseas location before using the
appliance. For connection to a 240-V supply, use an attachment plug adapter of the
proper configuration for the power supply receptacle. Note that the trimmer ON/OFF
switch must be in the OFF position for the battery to charge. Plug the adapter cord
directly into the bottom of the trimmer (Figure A). The green light on the trimmer
will turn on.
4
Publicidad
