Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION & USE
DESCRIPTION / CONNECTIONS
The hood may be installed in the Ducting or the Recalculating version.
Ducting version
The hood draws the cooking fumes saturated with
fumes and odor, through the grease filters and expels
it to the outside through an outlet pipe. With this
version the charcoal filters are not required.
Prepare the Hood for Ducting Version.
Cover one of the air outlet hole with the Air Outlet Cover from the installation kit,
attach the Air outlet adaptor. Make sure the DUCTING-RECIRCULATING LEVER IS
POINTING THE DUCTING MODE.
6.
Decide where the ductwork will run between the hood and the outside.
7.
A straight, short duct run will allow the hood to perform most efficiently.
8.
Long duct runs, elbows, and transitions will reduce the performance of the hood.
Use as few of them as possible. Larger ducting may be required for best
performance with longer duct runs.
9.
The air must not be discharged into a flue that is used for exhausting fumes from
appliances burning gas or other fuels Regulations concerning the discharge of air
have to be followed. Check with the local authority and building codes for exhaust
ducting requirements.
10. Install a roof/wall cap. Connect round metal ductwork to cap and work back
towards hood location.
18
4
Publicidad
