Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Install the metal grid and grease filter after charcoal filter is installed.
3.
To remove the charcoal filters, remove the charcoal filter by turning
anti-clockwise.
LAMPS
This range hood requires two LED (DC 12V, 2W Max)
WARNING: Always switch off the electrical supply before carrying out any operation
on the appliance.
To change lights:
1.
Push the LED lights from inside to outside. The lights will come out.
2.
Undo the light wire terminal, and replace with LED lights of same kind.
CAUTION:
1.
THE SURFACE, THE LIGHTS COVER MAY BE HOT. TAKE CARE WHEN
REPLACING LED lamps.
2.
THE LED LAMPS MAY BE HOT. TAKE CARE WHEN REPLACING LED
LAMPS.
We recommend only using lamps of the same specification as the ones being
replaced.
HOOD CLEANING
Stainless steel is one of the easiest parts to keep clean. Occasional care will help
preserve its fine appearance.
Cleaning tips:
* Hot water with soap or detergent is all that is usually needed.
* Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to
25
11
Publicidad
