Publicidad
Idiomas disponibles
Idiomas disponibles
avoid water marks.
* For discolorations or deposits that persist, use a non-scratching household cleanser
or stainless-steel polishing powder with a little water and a soft cloth.
* For stubborn cases use a plastic scouring pad or soft bristle brush together with
cleanser and water. Rub lightly in the direction of polishing lines or " grain" of the
stainless finish. Avoid using too much pressure that may mar the surface.
* Do not allow deposits to remain for long periods of time.
* Do not use ordinary steel wool or steel brushes. Small bits of steel may adhere to the
surface causing rust.
* Do not allow salt solutions, disinfectants, bleaches, or cleaning compounds to
remain in contact with stainless steel for extended periods. Many of these compounds
contain chemicals that may be harmful. Rinse with water after exposure and wipe dry
with a clean cloth.
* Painted surfaces should be cleaned with warm water and mild detergent only.
TROUBLE SHOOTING
The rangehood may not work or work improperly. Before calling after-sales service,
switch off the appliance, unplug the power supply and refer to this guide to determine
the problem.
If malfunction persist, contact our After Sales Service and specify the nature of the
problem, appliance model no and serial number (on the rating plate inside the hood)
Status
3.
No response
4.
of the lamps
and
the
The fuse on the PCB
motor
board is damaged.
The switch is damaged.
Reasons
The plug is off from
the power socket.
The power cord is
damaged.
3.
Ensure that the plug is put into
the power socket properly.
4.
Replace the power cord if the
power cord is damaged.
Replace the fuse on the PCB board.
Repair or replace the switch.
26
12
Solutions
Publicidad
