Asist AE5KR55DN-BMC Instrucciones De Uso página 53

Plasterboard:
▪ The plunge saw is only recommended for making oc-
casional cut outs in plasterboard and always us it with
a suitable vacuum cleaner or dust extractor connected.
The dust can prevent the guard operating correctly.
▪ Conventional tools such as keyhole saws or knives
generally give excellent results, though the plunge saw
can be used if a particularly neat, dust free cut is requ-
ired or if there is a danger of cutting pipes or cables.
CLEANING AND MAINTENANCE
Regular cleaning is required for the safe operation of
the tool, as an excessive build up of dust will prevent
the tool from operating correctly.
The dust extraction hose may block and require clea-
ning occasionally, especially if damp wood is being cut.
▪ Unplug from mains supply.
▪ Clean thoroughly with a small soft brush, like a paint
brush.
▪ Keep the cooling vents on the motor housing clean
and unobstructed at all times.
▪ Never use any caustic agents or solvents to clean
the plastic parts.
Blades
▪ Always use a sharp blade.
▪ If the tool does not cut as well as expected or if it
overheats (temperature cut out may trip) the most
common cause is a blunt blade.
▪ It is difficult to see or feel if the blade is blunt. When
in doubt use a new blade.
▪ Blades are consumable items.
▪ Beware when changing blades as they can become
hot during use. Allow the blade some time to cool be-
fore replacing it.
TECHNICAL DATA
Rated voltage
Rated frequency
Rated power
Rotation speed
Blade size
Max. cutting depth soft wood
Max. cutting depth steel
Max. cutting depth plastic
Carbon brush motor
Battery laser
Bore size
Number of teeth
Blade dimensions
BMC Yes Soft grip
Protection class
Subject to changes.
Sound pressure level measured according to EN
60745:
LpA (sound pressure) 94 dB (A) KpA=3
LWA (sound power) 105 dB (A) KwA=3
Take appropriate measures to protect your hearing!
Wear hearing protection whenever the sound pressure
exceeds the level of 80 dB (A).
Weighted effective acceleration according to EN
60745: 3,2 m/s2 K=1.5
Caution: The vibration level may vary during power
AE5KR55DN-BMC
230 V
50 Hz
550W
6000min-1
Ø 85 mm
26mm
2mm
5 mm
Yes
Yes
16 mm
20T
85 x 1.6 mm
Yes
II.
tool operation from the declared value depending on
the way the power tool is used and depending on the
following conditions: Method of power tool use and
type of material being cut or drilled, conditions of the
power tool and method of its maintenance, appro-
priateness of the used accessories and ensuring its
sharpness and good conditions, the strength of handle
gripping, use of anti-vibration equipment, suitability of
the power tool for the purpose for which it has been
designed and compliance with workflows according to
manufacturer's instructions.
If this power tool is used in an inappropriate manner, a
hand/shoulder vibration syndrome may appear.
Caution: For clarification, it is necessary to consider
the level of vibrations in specific conditions of use in all
operating modes, e.g. the time when the power tool is
switched off except for the operation time, and when
it idles, i.e. performs no work. This may substantially
decrease the exposition level during the whole operat-
ing cycle.
Minimize the risk of vibrations, use sharp chisels, drill
and blades.
Keepthe power toolin compliancewith theseinstruc-
tions and provide for its proper lubrication.
When using the power tool regularly, invest into anti-
vibration equipment.
Do not use the power tool under temperatures lower
than 10°C. Plan your project containing work with the
power tool producing high vibrations carefully and
spread it over more days.
Subject to changes.
ENVIRONMENTAL PROTECTIONWASTE MA-
NAgEMENT
Power tools, accessories and packaging should be
provided for recycling and not to harm the environment.
Do not dispose of power tools into household waste!
According to Directive 2012/19/EU of the European
Parliament and of the Council on waste electrical and
electronic equipment (WEEE) and its approximation
in national laws, unfit power tools must be handed
over at the point of purchase of similar equipment, or
in available collection points designated for collection
and disposal of power tools. Such disposed power
tools will be collected, disassembled and delivered for
environment-friendly recycling.
WARRANTY
In the attached material, you will find our warranty
conditions.
53