Garant GMT35 Manual De Uso página 48

GARANT GMT35 Surface finishing machine
3 Processing time
de
4 Selected work operation
5 Motor rotational speed
en
ü Water tank filled with water and compounds.
ü Trough filled with abrasive chips.
ü Suitable program created for the relevant application.
1. Select "Automatic" via the page bar or menu.
2. Select the desired program and press "Select" to confirm it.
cs
7.6.2.2.
da
Run Time
es
Speed
Pump
fr
hr
hu
1. Press to start the program running.
2. Once the program has completed, perform separation.
it
nl
pl
ro
sl
48
Start program
Automatic Mode
Test 1
h min
3000 rpm
On
CE 10x20 coarse
Separate
8 Abrasive chips in the left-hand chamber trough
9 Abrasive chips in the right-hand chamber trough
10 Select the program in order to view the detailed
settings and then start it.
STEP 1
On
Autostart in
Perform
On
separation
COPPER
Compound
PO 4x6 polish
1
Off