TFA 60.2038.01 Instrucciones De Uso página 12

TFA_No. 60.2038_Anleitung 04.12.2023
Digital alarm clock
• Slide the switch to the position LOCK.
• The display automatically reverts to the clock mode. The alarm is activated and the alarm symbol will appear on
the display.
8.2 Activate/deactivate alarm
• Press the AL ON/OFF button in normal mode to activate or deactivate the alarm function.
• The alarm time and the alarm symbol appear on the display. The alarm symbol flashes.
• After 3 seconds, the display automatically reverts to the clock mode. The alarm symbol remains on the display,
if the alarm is activated.
• When the adjusted alarm time is reached, the alarm rings.
• Press the SNOOZE/AL STOP sensor button to turn off the alarm.
• Note: If the snooze function is activated (snooze symbol visible), the snooze function is started.
• If the alarm is not stopped manually, the alarm tone automatically turns off after 90 seconds and will be reacti-
vated at the same set time in the following day.
• The alarm symbol remains on the display.
• Press the AL ON/OFF button in normal mode, to deactivate the alarm function. The alarm symbol disappears.
8.3 Snooze function
• To activate or deactivate the snooze function, press and hold the HOUR/12/24 button for 2 seconds in normal
mode (if the alarm is activated). The snooze symbol appears permanently when the snooze function is activated.
• When the adjusted alarm time is reached, the alarm rings.
20:51 Uhr Seite 12
– 22 –
Digital alarm clock
• Press the SNOOZE/AL STOP sensor button to start the snooze function.
• The snooze symbol flashes on the display.
• The alarm sound will be interrupted for 7 minutes.
• You can start the snooze function up to 3 times.
• Press any button to stop the snooze function.
• To deactivate the snooze function, press and hold the HOUR/12/24 button for 2 seconds in normal mode. The
snooze symbol will disappear.
9. Switch LCD-LED
• Use the AUTO/LED/LCD switch to choose between the LCD or LED display.
• If you move the switch to AUTO, the LED display turns on automatically as soon as the light sensor registers
darkness.
10. LED brightness
• You can adjust the brightness of the LED display in 2 steps (LOW or HIGH) with the slide switch.
• In LED mode, the weak backlight will automatically turn on between 8pm to 6am.
11. Dots between the hour and minute indicators
• The two dots flash every second on the display.
• To activate or deactivate the function, press the AL ON/OFF button for 2 seconds in normal mode.
– 23 –