Publicidad
Idiomas disponibles
Idiomas disponibles
Remove the jar from the base. Then remove the lid and pour the
•
liquid in the desired receptacle.
HOW TO CLEAN
Always unplug from outlet before cleaning.
•
For a quick rinsing of the pouring jar (for example between two
•
preparations), you can use clear water and switch on your
appliance for a few seconds. In this case, do not use any
detergent.
For a full cleaning, remove the jar from the motor block and turn
•
the blade fixing ring on the bottom of the jar anti-clockwise to
detach the sealing ring and the blade (this will make the
cleaning easier). Then you can clean these parts with soapy
water and rinse thoroughly with clear water. Dry before
assembling. To attach the blades, put the sealing ring around the
blades, insert them in the bottom of the jar and tighten the fixing
ring by turning it clockwise (tighten vigorously in order to avoid
leaks). Caution, do not lose the seal during this operation.
You can wipe the motor block with a soft damp cloth.
•
6
USK BL 3/4/5 - 060405
Publicidad
