Bushnell PRO X3+ Guia De Inicio Rapido página 4

Using Wind Feature
1. Press and hold the mode button to enter settings, advance
to the Wind on/off menu and turn Wind on.
2. Ensure the PRO X3+ is paired and connected to the Bushnell
Golf mobile app and the app is open and running on your
phone.
3. Ensure Slope is enabled on your PRO X3+.
4. When connected to and receiving data from the mobile
app, The headwind/tailwind and crosswind speeds will be
displayed in MPH (or KPH) in the upper Left of your display.
5. To change between MPH and KPH, go to your PRO X3+
setting in the mobile app.
6. If the internal compass is not calibrated, the directional
arrows will flash and the PRO X3+ will vibrate indicating the
compass is not calibrated.
7. To calibrate the compass, the laser needs to be rotated in
various directions.
8. Once the compass is calibrated, the wind values and
directions will display.
9. When the laser has a successful range, the wind values will
"lock" in the direction the laser was pointed during ranging
until the next attempted range.
Note: The PRO X3+ includes a BITE magnet and a digital compass. Digital compasses need to be
calibrated when there is a significant change in the surrounding magnetic field. Use of the BITE
magnet with the wind function may necessitate more frequent calibrations.
4
BITE Magnet
A powerful BITE magnet on the
right side of the ProX3+, allows
the unit to be securely attached to
a golf cart bar or frame.