Descargar Imprimir esta página

Ninja Foodi FLEXDRAWER AF500EU Manual De Instrucciones página 10

Ocultar thumbs Ver también para Foodi FLEXDRAWER AF500EU:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
CLEANING & MAINTENANCE
The unit should be cleaned thoroughly after every use. Unplug the unit from the plug
socket and wait until the unit is fully cooled before cleaning.
Part/Accessory
Cleaning Method
To clean the main unit and the control
panel, wipe them clean with a damp cloth
Main Unit
NOTE: NEVER immerse the main unit in
water or any other liquid. NEVER clean
the main unit in a dishwasher.
These can be washed in the dishwasher
or by hand. If using the dishwasher,
ensure parts are not washed on a 'heavy'
Drawer, Divider
or 'intensive' wash cycle. If handwashed
air-dry or towel-dry all parts after use.
and Crisper Plates
To extend the life of the drawer, divider
and crisper plates we recommend hand
washing them.
If food residue is stuck on the crisper plates or divider, place them in a sink filled
with warm, soapy water and allow to soak.
HELPFUL TIPS
1
For consistent browning, make sure
ingredients are arranged in an even
layer on the bottom of the drawer
with no overlapping. If ingredients are
overlapping, make sure to move them
around, using silicone tongs/utensils,
halfway through the set cook time.
2 Cook temperature and time can be
adjusted at any time during cooking.
Simply select the Zone you want to
adjust, then press the TEMP arrows
to adjust the temperature or the TIME
arrows to adjust the time.
3 To convert recipes from your conventional
oven, reduce the temperature by 10°C.
Check food frequently to avoid overcooking.
4 Occasionally, the fan from the air fryer
will blow lightweight foods around.
To alleviate this, secure foods (like the
top slice of bread on a sandwich)
with cocktail sticks.
17 ninjakitchen.co.uk
Dishwasher Safe?
No
Yes
5 The crisper plates elevate ingredients
in the drawer so air can circulate
under and around ingredients for
even, crisp results.
6 After selecting a cooking function, you
can press the dial to begin cooking
immediately. The unit will run at the
default temperature and time.
7 For best results with fresh vegetables
and potatoes, use at least 1 tablespoon
of oil. Add more oil as desired to achieve
the preferred level of crispiness.
8 For best results, check progress
throughout cooking and remove food
when desired level of brownness has
been achieved. We recommend using
an instant-read thermometer to monitor
the internal temperature of meat & fish.
9 For best results, remove food
immediately after the cook time is
complete to avoid overcooking.
TROUBLESHOOTING GUIDE
My unit won't turn on?
Please try plugging into a different socket. Also ensure that an extension cable isn't
being used.
How do I adjust the temperature or time while using a single Zone?
Select the active Zone, then use the TEMP arrows to adjust the temperature or the
TIME arrows to adjust the time.
How do I adjust the temperature or time while using MegaZone?
Select the desired Zone, then use the TEMP arrows to adjust the temperature or the
TIME arrows to adjust the time.
Does the unit need to pre-heat?
The unit does not need to be pre-heated.
Can I cook different foods in each Zone and not worry about cross contamination?
Yes, both Zones are self-contained with separate heating elements and fans.
How do I pause the countdown?
The countdown timer will pause automatically when you remove the drawer from the
unit. Reinsert drawer within 10 minutes to resume cooking or the Zone with the drawer
open will be cancelled.
How do I stop one Zone when using both Zones?
To stop one Zone, first press the Zone button then press START/STOP button. To stop
both Zones simply press the START/STOP button.
Is the drawer safe to put on my worktop?
The drawer will heat up during cooking. Use caution when handling, and place on heat
resistant surfaces only.
When should I use the crisper plates?
Use the crisper plates when you want food to come out crispy. The plate elevates the
food in the drawer so that air can flow under and around it to cook ingredients evenly.
Why didn't my food cook fully?
Make sure the drawer is fully inserted during cooking. For consistent browning, make
sure ingredients are arranged in an even layer on the bottom of the drawer with no
overlapping. Shake drawer to toss ingredients for even crispiness. Cook temperature
and time can be adjusted at any time during cooking. Simply use the TEMP arrows to
adjust the temperature or the TIME arrows to adjust the time.
Why is my food burned?
For best results, check progress throughout cooking and remove food when desired
level of brownness has been achieved. Remove food immediately after the cook time is
complete to avoid overcooking.
Why do some ingredients blow around when air frying?
Occasionally, the fan from the air fryer will blow lightweight foods around. Use wooden
cocktail sticks to secure loose lightweight food, like the top slice of bread on a sandwich.
Can I air fry wet, battered ingredients?
Yes, but use the proper breading technique. It is important to coat foods first with flour,
then with egg, and then with breadcrumbs. Press breadcrumbs firmly onto the battered
ingredients, so crumbs won't be blown off by the fan.
Why is the unit beeping?
Either the food is finished cooking or it indicates that the other Zone has started cooking.
Why did the display screen go black?
The unit is in standby mode. Press the power
Why is there an "E" message on the display screen?
The unit is not functioning properly. Please contact Customer Service at 0800 862 0453.
button to turn it back on.
ninjakitchen.co.uk
18

Publicidad

loading