Pioneer KURO PDP-S63 Manual De Instrucciones página 5

4. Connect the supplied the speaker
cables to the speaker.
• Connect the cables correctly with respect to the polarity
of the speaker terminals, that is,  cable (Gray) to 
terminals (Red) and  cable (Black) to  terminals
(Black).
�����
������
���������������������������������������������������������������������
NOTE:
• Press the lever and insert the end of
the cable.
• When you release the lever, it clamps
onto the speaker cable.
Caution
• Be sure to turn the connected devices off and remove
the power cord from the wall outlet beforehand when
changing the connection or installation method.
• If you insert the speaker cable too far so
that the insulation is touching the speaker
terminal, you may not get any sound. Please
insert it with showing the copper wire.
• Check if the end of the speaker cables are
securely connected to the terminals by
slightly tugging on the cable after making
connections. Loose connections may result
in sound dropouts or noise.
All manuals and user guides at all-guides.com
����
����
����������������
����������������
5. Connect the other end of the speaker
cables to the rear of flat screen TV.
• Connect the cables correctly with respect to the polarity
of the flat screen TV speaker terminals, that is,  cable
(Gray) to  terminals (Red) and  cable (Black) to 
terminals (Black).
�����
����
���
�����
����������������
• If there is a short in the  and  cables caused by an
exposed lead wire, excessive load may be applied to
the flat screen TV, resulting in interrupted operation or
malfunction.
• Incorrect connections of the speaker cable to the right
or left of the flat screen TV terminals with respect to the
polarity may result in insufficient stereo sound effects,
delivering poor bass sounds or unstable sound image.
• Bundle the cable without pulling.
English
����
���
�������������
5