Stihl FSA 65 Manual De Instrucciones página 48

English
Assembling the mowing head
Fit the empty spool in the mowing
N
head (3).
If the spring (4) has popped out:
Push the spring into the spool (2) as
N
far as stop.
46
Winding line onto spool
3
4
2
3
3
5
Use green-coded nylon line with a
N
diameter of 2.0 mm.
Cut two 2.5 m lengths of line from
N
the replacement reel (special
accessory).
Rotate the spool (2)
N
counterclockwise until the two arrow
points are in alignment.
Push the straight end of each line
N
through one sleeve (5) in the
mowing head (3) until you feel a
noticeable resistance – and then
continue pushing as far as stop.
Hold the mowing head steady.
N
Rotate the spool counterclockwise
N
until the shortest line is about
10 cm.
If necessary, cut the longer line to a
N
length of about 10 cm.
The mowing head is now full.
Mounting the Mowing Head
8
6
7
9
Slip the mowing head (6) over the
N
shaft (7) and engage hex recess (8)
on the external hexagon (9).
FSA 65, FSA 85