Descargar Imprimir esta página

ivoclar PrograScan PS7 Instrucciones De Uso página 17

Escáner de laboratorio
Ocultar thumbs Ver también para PrograScan PS7:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 85
4.2 Choosing the installation site
WARNING! Scanner exposed to direct sunlight or strong extraneous light.
Fire hazards and damage to the scanner due to overheating and unwanted reflections on the
scanner's monitor and sensor technology.
– Do not expose the scanner to direct sunlight and avoid direct proximity to heat sources (e.g.
radiators, other electrical appliances, fireplaces, etc.).
– Ensure generous air circulation around the scanner.
Since the environment has a significant influence on the scanner, you should be careful when
selecting an installation site and observe the following points:
– Avoid rapidly changing lighting conditions such as moving shadows and flickering lighting
(fluorescent LED).
– Do not expose the scanner to direct sunlight.
– Avoid direct proximity to heat sources (e.g. radiators, other electrical appliances, fireplaces, etc.).
– Ensure that the installation site is level and free from vibrations and contamination.
– Ensure that no extraordinary exposure to dust or toxic or corrosive gases and vapours or to
impermissible heat effects occurs at the installation site.
– Select a mounting or installation site where liquids or objects cannot enter the scanner under
any circumstances (e.g. condensation, roof leaks, spills, etc.).
– Ensure that the installation site is equipped with the necessary power and network connections.
– Only use and install the scanner indoor.
– Ensure that the installation site is free of increased electromagnetic radiation.
– Select a mounting or installation site which prevents children from touching the appliance and
its connections unattended.
– The installation site must allow for the safe positioning of all connected cables.
– Ensure that power supply cables and feeder cables are not damaged or crushed by other
objects.
– Ensure that the mains plug of the power supply unit is always accessible.
4.3 Lifting points
The two lifting points (1) and (2) are for carrying the
scanner. Hold the scanner at these two points with
your left and right hand. The scanner weighs
11–13 kg and can be carried by one person, with
the open side of the scanner facing away from
the body.
4. Function and assembly
1
2
17

Publicidad

loading