• This product is not suitable for running or skating.
• Check if the seat mounting devices are properly engaged before use.
• The product is intended for children from 6 up to a weight of 15 kg.
• The product is intended for the transport of one child at a time.
• Maximum load on the basket under the stroller up to 2 kg.
• The brakes should be locked when putting in and taking out your baby.
• Each additional load suspended on the parts of the stroller makes it lose its stability.
• Only use parts and accessories that have been supplied or recommended by the manufacturer.
• Do not place the product near an open flame or other heat sources.
• Do not leave the stroller on slopes, even with the brake applied.
• Regularly check the technical condition of the stroller.
• Do not use the stroller on uneven surfaces, near fire or other hazardous places.
• Do not use the stroller on stairs. Fold the stroller before going down or up stairs.
• Additional luggage put in the stroller may lead to the loss of its stability.
• Do not use the product if you are in any doubt about the correct operation of the wheechair or its
safety.
• The set does not include a mattress.
COMPONENTS:
A. Armrest
B. Canopy removal buton
C. Armrest removal buton
ACCESSORY: Bag
PRODUCT ASSEMBLY:
1. To unfold the stroller, open the locking latch, located on the side of the stroller. Then grab the push
handles and lift the stroller. Press the plastic piece at the back of the frame with your foot until you hear a
clicking sound, which indicates that the stroller is correctly unfolded (Figure 2).
2. Insert the wheels onto the protrusions at the bottom of the frame.
To remove the front wheels, press the quick-release button, which is located on the back of the wheel
-connected part of the frame.
To remove the rear wheels, press the quick-release button, which is located in the front of the rear wheel.
The buttons located in the front wheels allow you to lock the rotation of the wheels. Use the buttons in the
rear wheels to engage and disengage the brakes.
3. To install the armrest, grasp it with both hands and point it at the connectors located on both sides of
the stroller. Push the armrest into the connectors until you hear a click. To remove the armrest, press the
buttons located on both sides of the armrest.
EN
D. Brake
E. Rear wheel removal buton
F. Front wheel steering lock button
-
7