Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching the Fan Blades
Step 1. Remove the motor top cover by remove
the six screws with lock washers from the
motor collar. (Fig. 5)
Screws
Top of
motor
cover
Coupling
Motor
Figure 5
Step 2. Insert the blade assembly through the two
holes in the motor housing. Carefully insert blade
support plate with aid screw to blade arm on top
of the motor. Align the holes in the blade support
plate, blade arm and the fan motor assembly and
secure with 2 screw provided. (Fig. 6)
Step 3. Fasten the blade support plate to bottom
blade arm with 2 screw provided. Tighten screws
securely. (Fig. 6)
Screws
Blade support
plate with aid screw
Blade support
plate
Screws
Figure 6
Step 4. Remove the aid screws. You can keep
the aid screws for future use. (Fig. 7)
Step 5. Place the motor cover over the motor.
Align the mounting holes with the holes in the
motor and fasten using the six screws with
lock washers previously removed. (Fig. 7)
Top of
motor
cover
Blade arm
Figure 7
Screws
Remove
aid screws
Coupling
4.
Publicidad
