Glacier bay FP4A4066BNV Guía De Uso Y Cuidado página 5

installation
1
Turning off the water supply
□
Shut off the water supply.
□
If necessary, remove the old faucet and clean
off the installation surface.
3
Installing the faucet with the deckplate
□
Remove the preassembled lock nut (E), metal
washer (D), and rubber washer (J) from the
faucet body (G).
□
Place a bead of silicone sealant (not included)
around the base of the deck plate (C).
□
Place the deck plate (C) over the installation
holes in the sink and insert the faucet body
(G) into the deck plate (C) and through the sink.
2
Installing the faucet without
the deckplate
note: If you wish to install the faucet with the deckplate,
proceed to Step 3.
□
Remove the preassembled lock nut (E), metal
washer (D), and rubber washer (J) from the
faucet body (G).
□
Place the spout trim ring (H) over the
installation hole in the sink and insert the
faucet body (G) into the trim ring (H) and
through the sink.
J
D
E
5
Please contact 1-855-434-5224 for further assistance.
J
D
E
HOMEDEPOT.com
G
H
G
C
C