Glacier bay FP4A4066BNV Guía De Uso Y Cuidado página 6

installation (continued)
4
Installing the faucet
□
Loosen the screws on the lock nut (E) until the
ends of the screws are flush with the face of
the lock nut (E).
□
Attach the faucet body (G) from underneath
the sink using the rubber washer (J), metal
washer (D), and lock nut (E). Securely tighten
the screws on the lock nut (E).
6
Attaching the quick connector
□
Remove the cap from the discharge tube (I).
□
Attach the quick connector (L) to the discharge
tube (I). Push until the connections snap
together.
□
Pull down on the quick connector (L) to ensure
the connection is secure.
5
Connecting the water supply
lines
□
Attach the water supply lines (not included)
to the threaded end of the copper pipes of the
faucet (G). Securely tighten the supply line
nuts using two wrenches to avoid twisting the
copper pipes. Do not over tighten.
E
6
I
L