operation
Removing the quick Connecting Hose
caution: Use caution when removing the quick
connecting hose connections in order to prevent cutting
your hands.
□
Push the quick connector (L) housing up.
□
Hold the clip and housing together and pull
down.
care & cleaning
This faucet is designed for years of trouble-free performance. Keep it looking new by doing the following:
□
Clean periodically with a soft cloth.
□
Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void your warranty.
troubleshooting
Problem
There are leaks underneath the
handle.
The aerator leaks or has an
inconsistent water flow pattern.
There are leaks from the hose
underneath the deck.
The hose does not retract.
Possible Cause
The retainer nut has come loose and
the O-ring on the cartridge is dirty or
damaged.
The aerator is dirty or mis-fitted.
The hose and spray head connection
may be loose.
The weight is not installed in the
appropriate position.
8
Solution
□
Tighten the retainer nut.
□
Clear or replace the O-ring.
Remove the aerator, check for debris
in the aerator screens, and confirm
the rubber washer is properly
installed.
Tighten the connection between the
spray head and hose.
Reinstall or readjust the weight.