DeWalt DW934 Manual Del Usuario página 29

Do not switch the tool on or off when the
saw blade touches the workpiece or
other materials.
Holding and guiding the tool (fig. A & F)
• Clamp the workpiece as close to the cutting line
as possible.
• For optimum results, clamp the workpiece
bottom up.
• Always attempt to clamp the workpiece in a way
to minimize the number of teeth cutting through
the material.
• Hold the tool by the main grip and the front
handle (3) to guide the saw properly.
• Keep the shoe (8) firmly against the workpiece.
• Allow the blade to cut freely. Do not force. If the
workpiece starts vibrating you are forcing the
cutting action and you should slow down the
feed rate.
• Use the kerf indicator (5) to follow the line drawn
on the workpiece. The kerf indicator lines up with
the left (outer) side of the saw blade.
• Use the sight window (4) to view the cutting
action.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D WALT Power Tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
• Unplug the charger before cleaning the housing
with a soft cloth.
• Remove the battery pack before cleaning your
power tool.
• Keep the ventilation slots clear and regularly
clean the housing with a soft cloth.
Environment
Rechargeable battery pack
This long life battery pack must be recharged when
it fails to produce sufficient power on jobs which
were easily done before. At the end of its technical
life, discard it with due care for our environment:
• Run the battery pack down completely,
then remove it from the tool.
• NiCd and NiMH cells are recyclable. Take them
to your dealer or a local recycling station.
The collected battery packs will be recycled or
disposed of properly.
Unwanted tools
Take your tool to an authorised D
where it will be disposed of in an environmentally
safe way.
E N G L I S H
WALT repair agent
E
29