Publicidad
Idiomas disponibles
Idiomas disponibles
13.2
Maintenance
▪
Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
13.3
Cleaning
Use a brush, a dust cloth or vacuum cleaner, to remove all wood chips and sawdust from:
− The adjustment facilities
− The operating components
− The motor ventilation openings
− The space under the table gap.
13.4
Storage
HAZARD!
▪
Thoroughly clean the whole machine and its accessories.
▪
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
▪
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
▪
Don't keep it in plastic bags to avoid humidity build-up.
14 TECHNICAL DATA
Mains voltage
Power
Saw blade rpm
Saw blade dimensions
Cutting capacity:
As Table saw:
As mitre saw:
90° x 90°
45°(L) x 90°
45° (R) x 90°
90° x 45°
45°(L) x 45°
45°(R) x 45°
Machine dimensions:
Insulation class
Weight gross/net
15 NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Copyright © 2023 VARO
POWX07583
230-240 V ~ 50Hz
2000 W
-1
4800 min
254 x 30 x 2,8 mm - 36T
50 mm
H75 x W125 mm
H75 x W80 mm
H75 x W65 mm
H50 x W125 mm
H50 x W30 mm
H50 x W65 mm
480x290mm
II
19 kg / 16 kg
103 dB(A)
116 dB(A)
1,7 m/s²
P a g e
| 14
EN
K = 1,5 m/s²
www.varo.com
Publicidad
