Sony CDP-CE315 Manual De Instrucciones página 10

1 Os
Playing CDs
ae ees
Locating a Specific Track or a
Particular Point in a Track
You can quickly locate any track while playing a disc
using the AMS (Automatic Music Sensor) control or
number buttons on the remote. You can also locate a
specific point in a track while playing a disc.
kK AMS D>
</P> MUSIC SCAN
(CDP-CE315 and
CDP-C260Z only)
Number buttons
>10
>
Ke /> PI
<</>>
To locate You need to
The next or Z Turn KK AMS Pri clockwise until
succeeding tracks you find the track. When using the
remote, press PP repeatedly until you
find the track.
The current or Turn Kt AMS Pi counterclockwise
preceding tracks until you find the track. When using
the remote, press K€ repeatedly until
you find the track.
A specific track Press the number button of the track
directly (CDP- on the remote
CE315 and CDP-
C260Z only) L
A track by scanning Press MUSIC SCAN before you start
each track for 10 playing. When you find the track you
seconds want, press [> to start playing.
(Music Scan)
A point while | Press ® (forward) or << (backward)
monitoring the sound and hold down until you find the
point
A point quickly by —-Press B® (forward) or 4 (backward)
observing the display and hold down until you find the
during pause point. You will not hear the sound
during the operation.
cor When you directly locate a track numbered over 10
(CDP-CE315 and CDP-C260Z only) (7
Press >10 first, then the corresponding number buttons
on the remote. To enter "0," use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
¢ You can extend the playing time during Music Scan
Press MUSIC SCAN repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
vou press the button; the playing time changes cyclically.
Note
if" 77" appears in the display, the disc has reached the end
while you were pressing the B® button. Press <4 or turn
KK AMS bt counterclockwise to go back.