Publicidad
Idiomas disponibles
Idiomas disponibles
Operation (continued)
3
Using Party Mode
1. Make sure your Hubspace™ app is running, and your lights
are connected and ON.
2. In the app, on your Home screen, navigate to the string light
set and select. In the control screen for your string light set,
select the Preset icon, then select "Party Mode".
3. Place the Controller close to the source of music or sound to
which you would like it to coordinate (The mic is located on
the front top right of the controller.) You may need to adjust
this distance between the Controller and sound source to
better coordinate the Party Mode flashing pattern.
IMPORTANT: Party Mode works best when the Controller is close to the music source (ie. speakers, band stage.) Adjust the Controller's
distance from the sound source to improve its reaction.
NOTE:
□ Party Mode works best with music that contains a steady beat or rhythm, and with string instruments.
□ If the string light set is not reacting to the music, move the Controller closer to the sound/music source.
□ If there is extensive flickering that is not in time with the sound or music, move the Controller away from the sound source until it appears
to be better coordinated.
□ For best results, do not use an additional flashing pattern along with Party Mode.
8
Publicidad
