Publicidad
Idiomas disponibles
Idiomas disponibles
Before cleaning your ice maker, make sure that the drain cap has been
1
inserted into the drain pipes on the back of the ice maker. Otherwise the ice
maker will not work properly.
Press the
2
on. The cleaning cycle runs for at least 20 minutes, then the indicator light
turns off and the ice maker stops cleaning.
Press the
3
through.
After running a cleaning cycle, move your ice maker to the edge of the
4
countertop, turn it around, then place a large bowl under it.
Pull the drain pipes from the back of the ice maker and remove the drain plug
5
from the drain pipes.
Run the drain pipes into a large bowl and let the water drain from the tank.
6
Reinsert the drain cap into the drain pipes and replace the drain pipes on the
7
back of your ice maker. Your ice maker is ready to use.
Troubleshooting
CAUTION: Do not try to repair your ice maker yourself. Doing so invalidates the warranty.
PROBLEM
POSSIBLE CAUSE
The "Add Water"
No water in the reservoir.
indicator lights
10
(CLEAN) button for 3 seconds. The cleaning indicator lights turns
(CLEAN) button again to turn off the auto clean cycle midway
Drain pipes
www.insigniaproducts.com
POSSIBLE SOLUTION
Turn off your ice maker, remove the ice drawer,
add water to the reservoir, replace the drawer,
then press the
ICE button to begin making
ice.
Publicidad
