Publicidad
Idiomas disponibles
Idiomas disponibles
5. SETTINGS & OPERATION
5.1 Control panel
Power Consumption
Speed in rpm
Day/ Night/ Backwash
( Low/ Med/ High speed)
Lock/ Mode
On/ Off
5 . 2 Mode selection
The frequency inverter has 3 modes ( speed ranges) . You can either run
your pump at a constant speed choosing from "M" or set up to 4
timers for daily operation, each with an individual speed.
Mode
Night ( Low)
Day ( Medium)
Backwash ( High)
①
When plugged in,
to unlock the screen. Press
② Upon starting, pump will run at maximum speed of 2900 rpm
for one-minute self-priming. (This can be increased to 10
minutes – see Parameter settings Section 5.5)
③
Press
to choose a running speed, use
arrows to adjust by 50rpm to a specific running speed
if required.
Speed range
1200~1650 rpm
1700~2400 rpm
2 450~2900 rpm
lights up, hold
to start.
10
Increase/Decrease
Default speed
1400 rpm
2 0 0 0 rpm
2 9 0 0 rpm
for 3 seconds
or
Current time
Timer on/ Timer off
Timer
Publicidad
