Publicidad
Idiomas disponibles
Idiomas disponibles
Turntable Installation
Cleaning the cooking compartment and putting the turntable in place. For new
installations, make sure all packaging and shipping tape has been removed from the
turntable shaft. Before using the appliance to prepare food for the first time, you will
need to put the turntable in place correctly. You must clean the cooking compartment
and accessories.
1
2
NOTE
1. Never use the appliance without the turntable. Make sure that it is properly engage
The turntable can turn clockwise or anti-clockwise.
2. Never place the glass tray upside down. The glass tray should never be restricte
3. Both glass tray and turntable ring assembly must always be used during cookin
4. All food and containers of food are always placed on the glass tray for cookin
5. Never restrict the movement of the turntabl
6. If glass tray or turntable ring assembly cracks or breaks, contact your neare
authorized service center.
How to put the turntable in place:
1. . Place the turntable ring assembl
into the recess in the cooking
compartment.
2. . Place the glass tra
ring assembly
lines in the center of the glass tray
bottom between the three spokes of the
shaft. Make sure that the glass tray
engages in the turntable shaft
centre of the cooking compartment floor.
The rollers on the shaft should fit inside
the turntable bottom ridge.
3
EN-14
on the turntable
. Fit the raised, curved
in the
Publicidad
