Descargar Imprimir esta página

Midea MBMTG925E-BK Manual Del Usuario página 15

Ocultar thumbs Ver también para MBMTG925E-BK:

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Instruction
The following must be noted
Electrical connection
The appliance is fitted with a plug and must only be connected to a properly installed
earthed socket. Only a qualified electrician who takes the appropriate regulations into
account may install the socket or replace the connecting cable. If the plug is no longer
accessible following installation, an all-pole isolating switch must be present on the
installation side with a contact gap of at least 3 mm. Contact protection must be ensured
by the installation.
Fitted units
The installation cabinet must not have a back panel behind the appliance. Minimum
installation height: 850 mm.
Ventilation slots and intakes must not be covered.
Installing the oven - Fig. 2
NOTE
Do not trap or kink the mains lead.
EN-14

Publicidad

loading

Este manual también es adecuado para:

Mbmtg925e-wh