Installation Procedure; Spout Installation - Toto Guinevere Tb970dd Manual De Instrucciones Y Del Propietario

inSTallaTion Procedure

1. Spout installation

 make sure water supply is turned
off�
 After applying the top finish,
remove the plug from the spout
shank�
 loosen setscrew on the back of the
spout�
 remove the spout adapter�
 Thread the spout adapter onto the
spout shank�
 Take care not to damage the o-ring�
 Carefully insert the spout onto the
spout adapter� Take care not to
damage the o-rings�
 secure the spout with setscrew�
2. handle installation installation
 Thread first the top nut, then the top
nut adapter onto the deck adapter�
 install the stem adapter onto the
valve stem� secure with screw�
 slide the lever handle onto the stem
adapter� secure the handle with set
screw�
gasket
Top Finish
handles
screws
deck
adapter
4
spout
setscrew
spout adapter
plug
setscrews
stem
adapter
Top nut
adapter
Top nut