Samsung RT18 Serie Manual De Instrucciones página 40

Maintenance
Door reversal (applicable models only)
WARNING
• Tilting/laying the refrigerator requires minimum of 2 people.
• Disconnect power source and water line before reversing the doors.
• If the unit is allowed to lay on its back or side for more than an hour, let it stand for
15 minutes after it is returned to the upright position before plugging it in.
Tools required (not provided)
Phillips screwdriver
/ " (8 mm) socket wrench
5
16
(for bolts)
Accessories (provided)
Hinge Cover (L)
CAUTION
Throughout the entire reversing procedure, keep all the small parts (screws, caps, etc.) of
the refrigerator away from children or infants for safety reasons.
40 English
Flat-head screwdriver
/ " (10 mm) socket wrench
3
8
(for bolts)
Middle-Hinge Screw cap
/ " (11 mm) spanner
7
16
(for hinge shaft)
/ " (5 mm) Allen wrench
3
16
(for middle hinge)
Bottom-Hinge Screw cap