Publicidad
Idiomas disponibles
Idiomas disponibles
GLOBAL FEATURES
Spatial Delivery has two operating modes which are indicated
by the color of the Save/Recall switch.
GREEN = LIVE MODE
In Live Mode, the pedal will operate exactly
where the controls are set, and any changes
will have no effect on the presets unless
saved. The Save/Recall switch LED will stay
static green.
RED = PRESET MODE
In Preset Mode, stored presets are selected
using the Preset switch, and the physical
settings of the controls will be ignored. The
Save/Recall switch LED will stay static red.
SPATIAL DELIVERY COMES FACTORY SET TO
START UP IN LIVE MODE.
USER-ASSIGNABLE EXPRESSION CONTROL
Use any TRS expression pedal to take control over the
Range, Resonance or Filter controls! Spatial Delivery ships
with the EXP jack mapped to the Resonance.
Follow these steps to reassign the EXP functionality
1. Insert the expression pedal TRS plug into the EXP jack.
2. Place the expression pedal in the toe down position.
3. Turn the panel control on the Spatial Delivery that you
wish to put under control of the expression pedal. It
doesn't matter how far or which direction you turn
the control.
6
4. Put the expression pedal in the heel down position.
5. This control is now assigned to the EXP jack and can
be used with an expression pedal!
Helpful expression assignment tips
• If you turn the control that is assigned to the EXP jack
while the expression pedal is plugged in, the panel control
will override the expression pedal setting. The expression
pedal will reassume control the next time it is used.
• Different EXP assignments can be saved in each preset.
• You can use Control Voltage with the EXP jack! The CV
range is 0 to 3.3v.
TRS expression pedal wiring
Tip ...................................... Wiper
Ring ...................................+3.3V
Sleeve ..............................Ground
FLEXI-SWITCH
TECHNOLOGY
®
This device features Flexi-Switch Technology! This
relay-based, true bypass switching style allows you to
simultaneously use momentary and latching-style switching.
• For standard latching operation: Tap the footswitch
once to activate the effect and then tap again to bypass.
• For momentary operation: With the effect off, hold the
footswitch down for as long as you'd like to use the effect.
Once you release the switch, the effect will be bypassed.
NOTE: HOLDING THE BYPASS SWITCH DOWN
WHILE SPATIAL DELIVERY IS ACTIVATED WILL
SWITCH INTO THE SELECTED PRESET MODE!
Publicidad
