Ardo Alyssa Instrucciones De Uso página 8

3. Put the valve (c) over the valve base (b). The arrows must line up.
4. Insert the valve base (b) into the outer shell (d). When doing so, fi t the semicircular tabs of the funnel into the
semicircular slots on the outer shell and fi rmly put the membrane (a) over the edge of the round opening of the outer
shell. Now the valve is parallel to the lines on the outer shell and the valve lips are closed.
5. Insert the breast shell (e), ensuring that the slot on the edge of the breast shell comes to rest on the slot of the outer
shell (d). (This forms a spout opening for the breast milk.) Put the edge of the breast shell over the edge of the outer
shell and press down fi rmly.
6. Firmly press the membrane cap (f) onto the outer shell (d) as shown.
Important: To avoid accidental kinking of the
tubes, which might diminish suction, the mem-
brane caps may be turned such that the tube
entries are oriented towards each other.
en
3