Publicidad
Idiomas disponibles
Idiomas disponibles
Vane (vertical air direction) setting
<3D i-See sensor supported>
<3D i-See sensor not supported>
<3D i-See sensor supported>
Press the
button.
F1
<3D i-See sensor not supported>
Press the
or
F1
F2
Press the button as indicated above to go through the
following setting options.
Auto
Auto
Step 3
Swing
Swing
Select "Swing" to move the vanes up and down
automatically.
When set to "Step 1" through "Step 5", the vane will be
fixed at the selected angle.
under the vane setting icon
•
This icon will appear when the vane is set to "Step 2"
through "Step 5" during cooling or dry operation (depends
on the model).
The icon will go off in an hour, and the vane setting will
automatically change to "Step 1".
button.
Step 1
Step 2
Step 4
Step 5
25
Publicidad
